#!/bin/bash # Exit on error set -e # Confirm OpenWrt OS if ! grep -q "OpenWrt" /etc/os-release; then echo "โŒ This script must be run on an OpenWrt device." exit 1 fi echo "โœ” OpenWrt detected: $(. /etc/os-release && echo $PRETTY_NAME)" # Get SNMPv3 user info read -p "Enter SNMPv3 username (e.g., admin): " SNMP_USER read -s -p "Enter SNMPv3 password: " SNMP_PASSWORD echo read -s -p "Re-enter SNMPv3 password: " SNMP_PASSWORD_CONFIRM echo if [ "$SNMP_PASSWORD" != "$SNMP_PASSWORD_CONFIRM" ]; then echo "โŒ Passwords do not match. Exiting." exit 1 fi read -p "Enter SNMP system location (e.g., Router Closet): " SYS_LOCATION read -p "Enter SNMP system contact (e.g., admin@example.com): " SYS_CONTACT # Install SNMP echo "๐Ÿ“ฆ Installing snmpd and snmp-utils..." opkg update opkg install snmpd snmp-utils # Stop service before config echo "๐Ÿ›‘ Stopping SNMP service..." /etc/init.d/snmpd stop # Backup config cp /etc/config/snmpd /etc/config/snmpd.bak.$(date +%s) # Write SNMP config cat < /etc/config/snmpd config agent option agentaddress '161' option agentxsocket '/var/agentx/master' config system option location '$SYS_LOCATION' option contact '$SYS_CONTACT' config view option name 'all' option type 'included' option subtree '.1' config access option groupname 'notConfigGroup' option context '' option version 'v3' option level 'authPriv' option readview 'all' option writeview 'all' option notifyview 'all' config user option name '$SNMP_USER' option authproto 'MD5' option authpass '$SNMP_PASSWORD' option privproto 'AES' option privpass '$SNMP_PASSWORD' EOF # Enable and start SNMP echo "๐Ÿš€ Starting SNMP service..." /etc/init.d/snmpd enable /etc/init.d/snmpd start # Configure firewall echo "๐Ÿ” Adding firewall rule to allow SNMP on LAN (UDP/161)..." uci add firewall rule uci set firewall.@rule[-1].name='Allow-SNMP' uci set firewall.@rule[-1].src='lan' uci set firewall.@rule[-1].proto='udp' uci set firewall.@rule[-1].dest_port='161' uci set firewall.@rule[-1].target='ACCEPT' uci commit firewall /etc/init.d/firewall restart # Test SNMP locally echo "๐Ÿงช Running SNMPv3 test on localhost..." snmpwalk -v3 -u "$SNMP_USER" -l authPriv -a MD5 -A "$SNMP_PASSWORD" -x AES -X "$SNMP_PASSWORD" localhost echo "โœ… SNMPv3 successfully configured on OpenWrt ${PRETTY_NAME}"