# OpenWrt Router Setup OpenWrt router configuration and management scripts. --- ## Scripts ### Location: `openwrt_scripts/` | File | Purpose | |------|---------| | `openwrt_full-upgrade.sh` | Full firmware upgrade | | `installing_ipref.sh` | IP configuration | | `openwrt_snmp_defaults.txt` | SNMP config template | --- ## Full System Upgrade ### `openwrt_full-upgrade.sh` Perform a complete OpenWrt upgrade. **Usage:** ```bash ssh root@10.0.84.1 curl -sSL https://raw.githubusercontent.com/wickedyoda/public-setupfiles/main/openwrt_scripts/openwrt_full-upgrade.sh | sh ``` **Process:** 1. Downloads latest firmware 2. Validates checksum 3. Backs up config 4. Performs sysupgrade --- ## IP Configuration ### `installing_ipref.sh` Configure IP addresses and interfaces. **Typical usage:** ```bash # Access router via SSH ssh root@192.168.1.1 # Run configuration script ./installing_ipref.sh ``` --- ## SNMP on OpenWrt ### `openwrt_snmp_defaults.txt` Default SNMP configuration for OpenWrt routers. ```bash # Edit /etc/config/snmpd config agent option agentaddress 'udp:161' config view option name 'all' option type 'included' option oid '.1' config group option groupname 'publicGroup' option securitymodel 'v2c' config access option groupname 'publicGroup' option version 'v2c' option level 'noAuthNoPriv' ``` ### Installation ```bash # Install SNMP opkg update opkg install snmpd snmp-utils # Configure cat /etc/config/snmpd.d/openwrt-snmp_defaults.txt > /etc/config/snmpd # Restart /etc/init.d/snmpd restart ``` --- ## OpenWrt Management Tips ### SSH Access ```bash # Default credentials root@openwrt # Change password passwd ``` ### Package Management ```bash # Install packages opkg update opkg install # List packages opkg list-installed # Remove packages opkg remove ``` ### Configuration Backup ```bash # Backup config tar -czf /root/backup-$(date +%Y%m%d).tar.gz /etc/config/ # Restore tar -xzf backup-20240101.tar.gz -C / ``` --- ## Network Configuration ### Wireguard Client For WireGuard client setup, see [WireGuard VPN](../WG%20VPN%20setup/readme.md). ### Port Forwarding ```bash # Add port forward uci add firewall redirect uci set firewall.@redirect[-1].name='MyService' uci set firewall.@redirect[-1].src='wan' uci set firewall.@redirect[-1].src_dport='8080' uci set firewall.@redirect[-1].dest='lan' uci set firewall.@redirect[-1].dest_ip='192.168.1.100' uci set firewall.@redirect[-1].dest_port='80' uci commit firewall /etc/init.d/firewall restart ```