Add WG VPN setup: automated WireGuard client installer for Flint4
This commit is contained in:
1 parent
e804eb1fea
commit
b40aaf6f0e
2 files changed
+212
No files matched your search
Executable
+138
@@ -0,0 +1,138 @@
|
|||||||
|
#!/bin/bash
|
||||||
|
# =============================================================================
|
||||||
|
# WireGuard Client Autoconnect Installer for Flint4
|
||||||
|
# For Debian/Ubuntu systems connecting to Flint4 router at twy4us.duckdns.org
|
||||||
|
# =============================================================================
|
||||||
|
set -euo pipefail
|
||||||
|
|
||||||
|
RED='\033[0;31m'
|
||||||
|
GREEN='\033[0;32m'
|
||||||
|
YELLOW='\033[1;33m'
|
||||||
|
BLUE='\033[0;34m'
|
||||||
|
NC='\033[0m'
|
||||||
|
|
||||||
|
TUNNEL_NAME="wgclient2"
|
||||||
|
PEER_HOST="twy4us.duckdns.org"
|
||||||
|
CONFIG_DIR="/etc/wireguard"
|
||||||
|
CONFIG_FILE="${CONFIG_DIR}/${TUNNEL_NAME}.conf"
|
||||||
|
SERVICE_NAME="wg-${TUNNEL_NAME}"
|
||||||
|
|
||||||
|
info() { echo -e "${BLUE}[INFO]${NC} $1"; }
|
||||||
|
success() { echo -e "${GREEN}[SUCCESS]${NC} $1"; }
|
||||||
|
warn() { echo -e "${YELLOW}[WARN]${NC} $1"; }
|
||||||
|
error() { echo -e "${RED}[ERROR]${NC} $1"; }
|
||||||
|
|
||||||
|
if [[ $EUID -ne 0 ]]; then
|
||||||
|
error "This script must be run as root (use sudo)"
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
if ! command -v apt-get &>/dev/null; then
|
||||||
|
error "This script is for Debian/Ubuntu systems only"
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Step 1: Install WireGuard
|
||||||
|
info "Checking for WireGuard installation..."
|
||||||
|
if ! command -v wg &>/dev/null; then
|
||||||
|
info "Installing WireGuard..."
|
||||||
|
apt-get update -qq
|
||||||
|
apt-get install -y -qq wireguard wireguard-tools
|
||||||
|
success "WireGuard installed"
|
||||||
|
else
|
||||||
|
success "WireGuard already installed"
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Step 2: Get config file path
|
||||||
|
echo ""
|
||||||
|
echo -e "${BLUE}========================================${NC}"
|
||||||
|
echo -e "${BLUE} WireGuard Client Installer${NC}"
|
||||||
|
echo -e "${BLUE}========================================${NC}"
|
||||||
|
echo "This script will set up a WireGuard client tunnel '${TUNNEL_NAME}'"
|
||||||
|
echo "to connect to: ${PEER_HOST}"
|
||||||
|
echo ""
|
||||||
|
read -rp "Enter the path to your WireGuard config file (e.g., /root/wg0.conf, ~/wireguard.conf): " CONFIG_SOURCE
|
||||||
|
|
||||||
|
CONFIG_SOURCE="${CONFIG_SOURCE/#\~/$HOME}"
|
||||||
|
|
||||||
|
if [[ ! -f "$CONFIG_SOURCE" ]]; then
|
||||||
|
error "Config file not found: $CONFIG_SOURCE"
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
if ! grep -q "\[Interface\]" "$CONFIG_SOURCE" || ! grep -q "\[Peer\]" "$CONFIG_SOURCE"; then
|
||||||
|
error "Invalid WireGuard config (missing [Interface] or [Peer] section)"
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
success "Config file verified: $CONFIG_SOURCE"
|
||||||
|
|
||||||
|
# Step 3: Install config
|
||||||
|
info "Installing config to ${CONFIG_FILE}..."
|
||||||
|
mkdir -p "$CONFIG_DIR"
|
||||||
|
cp "$CONFIG_SOURCE" "$CONFIG_FILE"
|
||||||
|
chmod 600 "$CONFIG_FILE"
|
||||||
|
success "Config installed"
|
||||||
|
|
||||||
|
# Step 4: Create systemd service
|
||||||
|
info "Creating systemd service..."
|
||||||
|
cat > /etc/systemd/system/${SERVICE_NAME}.service << EOF
|
||||||
|
[Unit]
|
||||||
|
Description=WireGuard via wg-quick(8) for ${TUNNEL_NAME}
|
||||||
|
After=network-online.target
|
||||||
|
Wants=network-online.target
|
||||||
|
|
||||||
|
[Service]
|
||||||
|
Type=oneshot
|
||||||
|
RemainAfterExit=yes
|
||||||
|
ExecStart=/usr/bin/wg-quick up ${TUNNEL_NAME}
|
||||||
|
ExecStop=/usr/bin/wg-quick down ${TUNNEL_NAME}
|
||||||
|
Restart=on-failure
|
||||||
|
RestartSec=5
|
||||||
|
|
||||||
|
[Install]
|
||||||
|
WantedBy=multi-user.target
|
||||||
|
EOF
|
||||||
|
|
||||||
|
systemctl daemon-reload
|
||||||
|
systemctl enable "${SERVICE_NAME}"
|
||||||
|
success "Service created and enabled for boot"
|
||||||
|
|
||||||
|
# Step 5: Start the tunnel
|
||||||
|
info "Starting WireGuard tunnel..."
|
||||||
|
wg-quick up "$TUNNEL_NAME"
|
||||||
|
success "Tunnel is UP"
|
||||||
|
|
||||||
|
# Step 6: Verify
|
||||||
|
sleep 2
|
||||||
|
if ip link show "$TUNNEL_NAME" &>/dev/null; then
|
||||||
|
success "Interface ${TUNNEL_NAME} is active"
|
||||||
|
echo ""
|
||||||
|
echo "Tunnel details:"
|
||||||
|
ip addr show "$TUNNEL_NAME"
|
||||||
|
echo ""
|
||||||
|
echo "WireGuard status:"
|
||||||
|
wg show "$TUNNEL_NAME"
|
||||||
|
else
|
||||||
|
error "Interface not found. Check config and run: wg-quick up ${TUNNEL_NAME}"
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Summary
|
||||||
|
echo ""
|
||||||
|
echo -e "${GREEN}========================================${NC}"
|
||||||
|
echo -e "${GREEN} WireGuard Client Setup Complete!${NC}"
|
||||||
|
echo -e "${GREEN}========================================${NC}"
|
||||||
|
echo ""
|
||||||
|
echo "Tunnel: ${TUNNEL_NAME}"
|
||||||
|
echo "Peer: ${PEER_HOST}"
|
||||||
|
echo "Config: ${CONFIG_FILE}"
|
||||||
|
echo "Service: ${SERVICE_NAME}"
|
||||||
|
echo ""
|
||||||
|
echo "Commands:"
|
||||||
|
echo " wg-quick up ${TUNNEL_NAME} - Bring up"
|
||||||
|
echo " wg-quick down ${TUNNEL_NAME} - Bring down"
|
||||||
|
echo " wg show ${TUNNEL_NAME} - Show status"
|
||||||
|
echo " systemctl status ${SERVICE_NAME} - Service status"
|
||||||
|
echo ""
|
||||||
|
echo -e "${GREEN}Tunnel starts automatically on boot.${NC}"
|
||||||
@@ -0,0 +1,74 @@
|
|||||||
|
# WireGuard Client VPN Setup
|
||||||
|
|
||||||
|
Automated installer for WireGuard client tunnels on Debian/Ubuntu systems, connecting to the Flint4 router at `twy4us.duckdns.org`.
|
||||||
|
|
||||||
|
## Prerequisites
|
||||||
|
|
||||||
|
- A Debian/Ubuntu system (Debian 11+, Ubuntu 20.04+)
|
||||||
|
- Root/sudo access on the client machine
|
||||||
|
- A WireGuard configuration file (`.conf`) provided by the server administrator
|
||||||
|
- The WireGuard config must contain `[Interface]` and `[Peer]` sections
|
||||||
|
|
||||||
|
## Installation
|
||||||
|
|
||||||
|
1. Download the installer script:
|
||||||
|
```bash
|
||||||
|
curl -sSL https://raw.githubusercontent.com/wickedyoda/public-setupfiles/main/"WG%20VPN%20setup"/install-wireguard-client.sh -o install-wireguard-client.sh
|
||||||
|
chmod +x install-wireguard-client.sh
|
||||||
|
```
|
||||||
|
|
||||||
|
2. Run the installer:
|
||||||
|
```bash
|
||||||
|
sudo ./install-wireguard-client.sh
|
||||||
|
```
|
||||||
|
|
||||||
|
3. When prompted, enter the path to your WireGuard configuration file (e.g., `/root/wg0.conf`, `/tmp/my-wg.conf`, etc.)
|
||||||
|
|
||||||
|
## What the Script Does
|
||||||
|
|
||||||
|
1. **Installs WireGuard**: `wireguard` and `wireguard-tools` packages
|
||||||
|
2. **Copies your config**: Places it at `/etc/wireguard/wgclient2.conf` with secure permissions (600)
|
||||||
|
3. **Creates a systemd service**: `wg-wgclient2.service` that:
|
||||||
|
- Auto-starts on boot
|
||||||
|
- Auto-restarts on failure
|
||||||
|
- Starts after network is online
|
||||||
|
4. **Brings up the tunnel**: Immediately activates the WireGuard connection
|
||||||
|
5. **Verifies**: Confirms the interface is up and displays WireGuard handshake status
|
||||||
|
|
||||||
|
## Management Commands
|
||||||
|
|
||||||
|
```bash
|
||||||
|
# Check tunnel status
|
||||||
|
wg show wgclient2
|
||||||
|
|
||||||
|
# Bring tunnel down
|
||||||
|
sudo wg-quick down wgclient2
|
||||||
|
|
||||||
|
# Bring tunnel up
|
||||||
|
sudo wg-quick up wgclient2
|
||||||
|
|
||||||
|
# Check systemd service
|
||||||
|
sudo systemctl status wg-wgclient2
|
||||||
|
|
||||||
|
# Restart tunnel
|
||||||
|
sudo systemctl restart wg-wgclient2
|
||||||
|
|
||||||
|
# View logs
|
||||||
|
sudo journalctl -u wg-wgclient2 -f
|
||||||
|
```
|
||||||
|
|
||||||
|
## Configuration
|
||||||
|
|
||||||
|
The script hardcodes the following defaults:
|
||||||
|
- **Tunnel name**: `wgclient2` (interface name)
|
||||||
|
- **Peer host**: `twy4us.duckdns.org` (Flint4 DuckDNS hostname)
|
||||||
|
- **Config destination**: `/etc/wireguard/wgclient2.conf`
|
||||||
|
|
||||||
|
To change the tunnel name, edit the script before running it.
|
||||||
|
|
||||||
|
## Troubleshooting
|
||||||
|
|
||||||
|
- If the tunnel doesn't start, check: `sudo journalctl -u wg-wgclient2 -n 50`
|
||||||
|
- Verify config file permissions: `ls -la /etc/wireguard/wgclient2.conf` (must be 600)
|
||||||
|
- Test connectivity to the peer: `ping <tunnel-ip-from-config>`
|
||||||
|
- Check WireGuard errors: `sudo wg show wgclient2` (look for handshake errors)
|
||||||
Reference in new issue
Block a user