diff --git a/snmp/setup_snmp_openwrt_v2.sh b/snmp/setup_snmp_openwrt_v2.sh new file mode 100644 index 0000000..00fd5b5 --- /dev/null +++ b/snmp/setup_snmp_openwrt_v2.sh @@ -0,0 +1,93 @@ +#!/bin/bash + +# Exit on error +set -e + +# Confirm OpenWrt OS +if ! grep -q "OpenWrt" /etc/os-release; then + echo "โŒ This script must be run on an OpenWrt device." + exit 1 +fi + +echo "โœ” OpenWrt detected: $(. /etc/os-release && echo $PRETTY_NAME)" + +# Get SNMPv3 user info +read -p "Enter SNMPv3 username (e.g., admin): " SNMP_USER +read -s -p "Enter SNMPv3 password: " SNMP_PASSWORD +echo +read -s -p "Re-enter SNMPv3 password: " SNMP_PASSWORD_CONFIRM +echo + +if [ "$SNMP_PASSWORD" != "$SNMP_PASSWORD_CONFIRM" ]; then + echo "โŒ Passwords do not match. Exiting." + exit 1 +fi + +read -p "Enter SNMP system location (e.g., Router Closet): " SYS_LOCATION +read -p "Enter SNMP system contact (e.g., admin@example.com): " SYS_CONTACT + +# Install SNMP +echo "๐Ÿ“ฆ Installing snmpd and snmp-utils..." +opkg update +opkg install snmpd snmp-utils + +# Stop service before config +echo "๐Ÿ›‘ Stopping SNMP service..." +/etc/init.d/snmpd stop + +# Backup config +cp /etc/config/snmpd /etc/config/snmpd.bak.$(date +%s) + +# Write SNMP config +cat < /etc/config/snmpd +config agent + option agentaddress '161' + option agentxsocket '/var/agentx/master' + +config system + option location '$SYS_LOCATION' + option contact '$SYS_CONTACT' + +config view + option name 'all' + option type 'included' + option subtree '.1' + +config access + option groupname 'notConfigGroup' + option context '' + option version 'v3' + option level 'authPriv' + option readview 'all' + option writeview 'all' + option notifyview 'all' + +config user + option name '$SNMP_USER' + option authproto 'MD5' + option authpass '$SNMP_PASSWORD' + option privproto 'AES' + option privpass '$SNMP_PASSWORD' +EOF + +# Enable and start SNMP +echo "๐Ÿš€ Starting SNMP service..." +/etc/init.d/snmpd enable +/etc/init.d/snmpd start + +# Configure firewall +echo "๐Ÿ” Adding firewall rule to allow SNMP on LAN (UDP/161)..." +uci add firewall rule +uci set firewall.@rule[-1].name='Allow-SNMP' +uci set firewall.@rule[-1].src='lan' +uci set firewall.@rule[-1].proto='udp' +uci set firewall.@rule[-1].dest_port='161' +uci set firewall.@rule[-1].target='ACCEPT' +uci commit firewall +/etc/init.d/firewall restart + +# Test SNMP locally +echo "๐Ÿงช Running SNMPv3 test on localhost..." +snmpwalk -v3 -u "$SNMP_USER" -l authPriv -a MD5 -A "$SNMP_PASSWORD" -x AES -X "$SNMP_PASSWORD" localhost + +echo "โœ… SNMPv3 successfully configured on OpenWrt ${PRETTY_NAME}" \ No newline at end of file